n-BUTYL METHACRYLATE


PRODUCT IDENTIFICATION

CAS NO.

97-88-1

n-BUTYL METHACRYLATE

EINECS NO. 202-615-1
FORMULA H2C=C(CH3)COO(CH2)3CH3
MOL WT. 142.20

H.S. CODE

2916.14
TOXICITY Oral rat LD50: > 2000 mg/kg
SYNONYMS 2-Methyl-2-Propenoic Acid Butyl Ester;
Butyl 2-Methyl-2-Propenate; 2-Methyl butyl acrylate; Butil Metacrilato (Italian); Butyl 2-methyl-2-propenoate; 2-Methyl-butylacrylaat (Dutch); BMA; 2-methyl-butylacrylat (German); Butylmethacrylaat (Dutch); Methacrylate De Butyle (French); Methacrylsaeurebutylester (German);
DERIVATION

 

CLASSIFICATION

 

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE

clear liquid

MELTING POINT

-75 C

BOILING POINT

160 - 163.5 C

SPECIFIC GRAVITY

0.896

SOLUBILITY IN WATER Insoluble
pH  
VAPOR DENSITY 4.9

AUTOIGNITION

290 C

NFPA RATINGS

 

REFRACTIVE INDEX

1.4230
FLASH POINT 46 C
STABILITY The stability depends upon dissolved oxygen and MEHQ inhibitor. The presence of oxygen is necessary for inhibitor to prevent polymerization.

APPLICATIONS

Acrylic acid is the simplest unsaturated carboxylic acid which has double bond and carboxyl group in C3 one molecule with the formula CH2=CHCOOH. The vinyl group is attached to the carbonyl carbon directly. The systemic name is 2-propenoic acid. Acrylic acid has two reaction points or functional groups required for polymerization process. Purified (glacial) acrylic acid is a clear, colorless liquid with a characteristic acrid odor. It is miscible with water, alcohols and ethers. Acrylic acid is produced from C 3 refinery. Acrylic acid undergoes the typical reactions of a carboxylic acid and forms acrylic esters - basic alkyl esters are methyl, butyl, ethyl acrylate, and 2-ethylhexyl acrylate. Acrylic acid and its esters undergo the reactions of the double bond which readily combine with themselves or other monomers (e.g amides, methacrylates, acrylonitrile, vinyl, styrene and butadiene) to form homopolymers or co-polymers which are used in the production of coatings, adhesives, elastomers, super absorbent polymers, flocculants, as well as fibres and plastics. Acrylate polymers show a wide range of properties dependent on the type of the monomers and reaction conditions.

Alkyl acrylates are clear, volatile liquid; slightly soluble in water and complete soluble in alcohols, ethers and almost organic solvents; Acrylate esters containing a double bond and functional carboxyl group are used chiefly as a monomer or co-monomer in making acrylic and modacrylic fibres. It is used in formulating paints and dispersions for paints, inks, and adhesives. It is used in making cleaning products, antioxidant agents, amphoteric surfactants. It is used in making aqueous resins and dispersions for textiles and papers. Methyl acrylate also used in making vitamin B1.

 

Methyl acrylate

Ethyl acrylate

Butyl acrylate

2-Ethylhexyl acrylate

CAS RN

96-33-3

140-88-5

141-32-2

103-11-7

Formula
(MW)

CH2=CHCOOCH3

CH2=CHCOOCH2CH3

CH2=CHCOO(CH2)3CH3

CH2=CHCOOC8H17

Mole Weight

86.09

100.12

128.17

184.28

Specific Gravity

0.9567

0.923

0.9015

0.887

Viscosity cP (20 C)

0.49

0.6

0.9

1.7

Boiling Point C
at 760 mm Hg

79.6

100

147

216 C
(Decomposes)

Melting Point C

< -75

-72

-64

-90

Solubility in water

slightly soluble
30 - 60 (g/l)

slightly soluble
(15 g/l)

Slightly soluble
(2-7 g/l)

negligible

 

Methyl methacrylate (MMA) is ester of the unsaturated C4 carboxylic acid. The term of metha indicates an additional methyl group attached to the alpha carbon of acrylic acid. Methyl methacrylate is a flammable, colorless liquid; melting at -48 C, boiling at 101 C, soluble in the most organic solvents but insoluble in water. It is prepared by the esterification of methacrylamide sulfate with methanol. (The reaction of acetone and hydrogen cyanide forms acetone cyanohydrin, which is further treated with sulfuric acid to produce methacrylamide sulfate). Ammonium bisulfate is a byproduct. MMA is produced commercially also from C4 route ( isobutylene and tert-butyl alcohol) through two oxidation process.  This process don't need  sulphuric acid and no acidic by-products. MMA is the monomer to make polymethyl methacrylate (PMMA) used as a shatterproof replacement for glass. It is a key ingredient in the production of cast and extruded acrylic sheet, acrylic emulsions, molding powders and extrusion resins. Polymers and copolymers of methyl methacrylate are also used in undissolved surface coatings, adhesives, sealants, impact modifiers, emulsion polymers, surgical bone cements, packaging applications, vinyl siding and other construction materials.

Acrylics including (meth)acrylic acids, acrylic esters, and acrylic compounds containing reactive halogens, nitrile and amide groups are versatile monomers forming any class of hard, soft, resilient and transparent synthetic plastics or resins and viscous oils by varying the starting materials and the polymerization processes. The monomers can be either homopolymerized or be copolymerized with other type monomers capable of being polymerized. The resultant homopolymers can provide abundance hydrophilic property groups. Copolymers may be either hydrophilic or hydrophobic. Sodium acrylate is copolymerized with acrylamide to make an anionic copolymer used as a flocculant in water treatment. Acrylic esters copolymers with minor amounts of another functional monomer containing a reactive halogen or ethylenically unsaturated ester can form inter-linked polymer chains that display good heat and oil resistance. Homopolymers and copolymers have a variety of industrial applications including;

  • Plastics
  • Textiles
  • Thickening Agents
  • Dispersing Agents
  • Surfactants
  • Chelating Agents
  • Adhesives
  • Water-based coatings
  • Water Treatment

n-Butyl Methacrylate is a base material for coatings and adhesives. It is used in resins, solvent, coatings, adhesives, oil additives, dental products, textile emulsions, leather and paper finishing.

SALES SPECIFICATION

APPEARANCE

clear liquid

PURITY

99.0% max

COLOR, APHA

20 max

FREE ACID

0.005% max

WATER

0.1% max

INHIBITOR

25ppm (Monomethyl Ether Hydroquinone)

TRANSPORTATION

PACKING 180kgs in drum
HAZARD CLASS 3 (Packing Group: III)
UN NO.

2227




REMARKS