ALIPHATIC SOLVENTS

ALIPHATIC SOLVENTS
HEPTANE
APPLICATION
Aliphatic Solvent / Petrochemical, Pharmaceuticals, Adhesives, Polymerization Media
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.690 ~ 0.730 at 15.56 C	ASTM D 4052
DISTILLATION	INITIAL POINT	°C	92 min	ASTM D 1078
	END POINT		100 max
COLOR		Saybolt	30	ASTM D 156
NON-VOLATILE MATTERS		mg/100ml	0.6 max	ASTM D 1353
BROMINE INDEX		mg/100g	100 max	ASTM D 1492
TOTAL SULFUR		ppm	10 max	ASTM D 3120
COPPER CORROSION		1-a	1-a	ASTM D 130
S-ALINP76
APPLICATION
Aliphatic Solvent / Foaming Agents, Petrochemical
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.620 ~ 0.650 at 15.56 C	ASTM D 4052
C4 AND LIGHTER		wt %	1.0 max	G.C
C5 ISOMER		wt %	16 ~ 22	G.C
NORMAL C5		wt %	76 min	G.C
C6 AND HEAVIER		wt %	3.0 max	G.C
COLOR		Saybolt	30	ASTM D 156
OLEFIN		wt %	0.1 max	G.C
NON-VOLATILE MATTERS		mg/100ml	0.5 max	ASTM D 1353
TOTAL SULFUR		ppm	10 max	ASTM D 3120
S-ALIP50-45
APPLICATION
Aliphatic Solvent / Foaming Agents,
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.605 ~ 0.645 at 15.56 C	ASTM D 4052
C4 AND LIGHTER		wt %	0.5 max	G.C
C5 ISOMER		wt %	45 ± 5	G.C
NORMAL C5		wt %	50 ± 5	G.C
C6 AND HEAVIER		wt %	7.0 max	G.C
COLOR		Saybolt	30	ASTM D 156
OLEFIN		wt %	0.1 max	G.C
NON-VOLATILE MATTERS		mg/100ml	0.5 max	ASTM D 1353
TOTAL SULFUR		ppm	10 max	ASTM D 3120
S-ALI55-80
APPLICATION
Aliphatic Solvent / wax, PVC Formulation
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.755 ~ 0.780 at 15.56 C	ASTM D 1298
DISTILLATION	INITIAL POINT	°C	155 min	ASTM D 86
	50 %		180 max
	END POINT		210 max
FLASH POINT		°C	38 min	ASTM D 56
ANILINE POINT		°C	72 max	ASTM D 611
AROMATIC CONTENT		vol %	0.5 max	ASTM D 130
SULFUR CONTENT		ppm	1 max	ASTM 3961
COLOR		Saybolt	+ 28	ASTM D 156
S-ALI75-95
APPLICATION
Aliphatic Solvent / Textile, Fabric, Wax
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.775 ~ 0.795 at 15.56 C	ASTM D 4052
DISTILLATION	INITIAL POINT	°C	150 min	ASTM D 86
	END POINT		210 max
FLASH POINT		°C	38 min	ASTM D 56
ANILINE POINT		°C	68 max	ASTM D 611
COLOR		Saybolt	+ 28	ASTM 156
AROMATIC CONTENT		vol %	15.0 max	ASTM D 130
SULFUR CONTENT		ppm	5 max	ASTM D 3961
S-ALI00-20
APPLICATION
Aliphatic Solvent / Adhesives, Paint
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.700 ~ 0.720 at 15.56 C	ASTM D 4052
DISTILLATION	INITIAL POINT	°C	30 min	KS M 2031
	50 %		75 ~ 86
	END POINT		150 max
ANILINE POINT		°C	55 max	ASTM D 611
COLOR		Saybolt	+ 28	ASTM D 156
COPPER CORROSION		1-a	1 max	ASTM D 130
S-ALI30-60
APPLICATION
Aliphatic Solvent / Adhesives, Paint
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.730 ~ 0.760 at 15.56 C	ASTM D 4052
DISTILLATION	INITIAL POINT	°C	80 min	KS M 2031
	50 %		120 max
	END POINT		170 max
ANILINE POINT		°C	55 max	ASTM D 611
COLOR		Saybolt	+ 28	ASTM D 156
COPPER CORROSION		1-a	1 max	ASTM 130
S-ALI80-30
APPLICATION
Aliphatic Solvent / Paint
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD
SPECIFIC GRAVITY		g/cm³	0.680 ~ 0.730 at 15.56 C	ASTM D 4052
DISTILLATION	INITIAL POINT	°C	55 min	ASTM D 1078
	50 %		120 max
	END POINT		140 max
ANILINE POINT		°C	70 max	ASTM D 611
COLOR		Saybolt	+ 28	ASTM D 156
COPPER CORROSION		1-a	1 max	ASTM 130
Iso-HEXANE
APPLICATION
Aliphatic Solvent / Adhesives
SPECIFICATION
PROPERTY		UNIT	VALUE	TEST METHOD